ISO/TR TECHNICAL REPORT 10314-1 First edition 1990-12-15 Industrial automation - Shop floor production - Part 1: Reference model for standardization and a Automation industrielle - Production en atelier - Partie 1: Modele de reference pour la normalisation et une methodologie en vue de I'identification des prescriptions Reference number ISO/TR 10314-1 : 1990 (E) Copyright International Organization for Standardization cing permitted without license from IHS Not for Resale ISO/TR 10314-1 : 1990 (E) Contents Page Scope and Field of Application 1 1 1.1Scope 1.2 Field of Application 2 Terminology. 5 2 2.1 General 5 2.2 Specific terms. 5 3 Abbreviations 6 Objectives for Manufacturing Standardisation 7 4 4.1 General information . 7 4.2 Standards Viewpoints for Manufacturing . 8 5TheReferenceModelforShopFloorProduction 10 5.1 General Information . 10 5.2 The Context of Shop Floor Production 10 5.3 The Shop Floor Production Model (SFPM) 11 5.4 The Generic Activity Model (GAM) 11 6Methodology for extracting areas of standards, 14 General Information 14 6.1 6.2Overall Approach 14 Extraction Procedures 15 6.3 6.4 Matrix Representation of Identification Procedures 17 Summary 17 ISO1990 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Organization for Standardization Case postale 56 . CH-1211 Geneve 20 Switzerland Printed in Switzerland pyrightInternational Organization for Standardization e from IHS Not for Resale ISO/TR 10314-1 : 1990 (E) Foreword ISo (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through IsO technical committees. Each member mental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the tnternational Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The main task of ISO technical committees is to prepare International Standards. In ex- ceptional circumstances a technical committee may propose the publication of a Technical Report of one of the following types : type 1, when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts; type 2, when the subject is stili under technical deveiopment or where for any other reason there is the future but not immediate possibility of an agreement on an International Standard; that which is normally published as an International Standard ("state of the art", for example). Technical Reports of types 1 and 2 are subject to review within three years of publica- tion, to decide whether they can be transformed into International Standards. Technical Reports of type 3 do not necessarily have to be reviewed until the data they provide are considered to be no longer valid or useful. ISO/TR 10314-1, which is a Technical Report of type 3, was prepared by Technical Committee ISO/TC 184, Industrial automation systems and integration. This document is being published in the form of a Technical Report because it is not possible, in view of the current state of the art of modelling for manufacturing, to draw up an International Standard which would be complete and precise, and which wouid not be too restrictive in this rapidly changing field. This Technical Report is intended as a guideline and will be reviewed and augmented periodically. ISO/TR 10314 consists of the following parts, under the general title Industrial auto- Shop floor production: mation - Part 1: Reference model for standardization and a methodology for identifica- tion of requirements Part 2: Application of the reference model for standardization and methodology ili Copyrghtlinternational Oorganizatin for Standardization Not for Resale cense from IHS